What we’ve been up to

News

Drilling and Filling for a Fresh Start

Drilling and Filling for a Fresh Start. A warehouse operator moving out left behind the usual signs of heavy-duty storage—rows of dynabolts sticking out of the floor. Rather than cutting corners, we took the proper approach: drilling out the bolts completely and...

End-of-Lease Floor Repairs: No Bolts Left Behind

End-of-Lease Floor Repairs: No Bolts Left Behind. Vacating a warehouse means more than just clearing out stock—it often involves a full make-good process, including removing embedded racking bolts. Today, we worked on a site where hundreds of floor bolts had to be...

Warehouse Floor Restoration: Removing Old Anchor Bolts

Warehouse Floor Restoration: Removing Old Anchor Bolts. Racking systems in warehouses are built to last, but when they’re removed, they leave behind hundreds of deep-set bolts that need to be dealt with properly. On today’s job, we removed old anchors from a large...

Cleaning Up Warehouse Floors with Core Drill & Fill

Cleaning Up Warehouse Floors with Core Drill & Fill. End-of-lease warehouse make-goods are all about leaving the space in the best possible condition for the next tenant. This means removing old fixings, filling the bolt holes, and restoring the surface to be...

Removing Old Rack Fixings the Right Way

Removing Old Rack Fixings the Right Way. Warehouse floors take a beating over the years, especially when heavy-duty racking is bolted in place. We were brought in to clear out an old storage space where hundreds of dynabolts and floor anchors needed to be removed....

Preparing a Warehouse Floor for a New Tenant

Preparing a Warehouse Floor for a New Tenant. When businesses relocate, they often leave behind signs of their setup—most commonly, the deep-set bolts that held racking in place. This week, we worked on a large warehouse, removing over 500 old bolts embedded in the...

Warehouse Make-Good: Drilling, Filling, and Leveling

Warehouse Make-Good: Drilling, Filling, and Leveling. A recent warehouse job had us tackling end-of-lease repairs, mainly removing and filling old floor anchors. The racking had been taken out, leaving hundreds of bolt holes across the floor—each one needing proper...

Removing Warehouse Racking Bolts for a Clean Slate

Removing Warehouse Racking Bolts for a Clean Slate. When warehouse tenants move out, one of the biggest jobs left behind is dealing with old racking bolts. Today, we were called in to remove hundreds of dynabolts that once secured heavy storage units. Some bolts came...

Removing Floor Anchors for a Fresh Start

Removing Floor Anchors for a Fresh Start. Old floor anchors can be a real pain if not removed properly. Today, we worked on a site where dozens of them needed to come out before new flooring could be laid. Some bolts could be unscrewed, but others had to be ground...

Bollard Removal in a Warehouse

Bollard Removal in a Warehouse. Warehouse bollards take a beating over time, and today we were called in to remove a few damaged ones. The job involved cutting through the fixings, pulling the bollards out, and grinding the surface back to level. Some bolts were easy,...

Removing and Filling Old Dynabolt Holes

Removing and Filling Old Dynabolt Holes. This week, we tackled a site where dozens of old dynabolts needed removing. Some came straight out, while others were sheared off and needed drilling. Once they were out, we filled the holes with epoxy resin, leaving the...

Surface Grinding for a Clean Finish

Surface Grinding for a Clean Finish. After some core drilling work, we moved on to surface grinding to even out rough patches left behind from old fittings. It’s one of those jobs that makes a big difference but often goes unnoticed—smoothing out the surface so new...

Removing Old Floor Anchors

Removing Old Floor Anchors. We spent the day pulling out old floor anchors from a warehouse site. Some came out easy, while others needed a bit of grinding and drilling to remove properly. It’s always satisfying to leave a clean surface behind, ready for new...

Precision Core Drilling on Site

Precision Core Drilling on Site. Today’s job involved drilling multiple core holes through a thick concrete floor for new service installations. The drill setup was simple—mark, drill, extract, repeat. With reinforced concrete, precision and the right tools make all...

Core Drilling & Filling – Another Day on Site

Core Drilling & Filling – Another Day on Site. Here’s a look at a recent core drilling job, cutting precise holes through a concrete slab to make way for new fixtures. Using a diamond-tipped core drill, we worked through reinforced concrete with minimal mess and...

Next Entries »

What we’ve been up to

News

Copyright © 2025 Core Drill and Fill. All Rights Reserved.